32
Masking Mode Setting
1 Follow steps 1-2 for the masking setting.
2 Each press of the [X] or [Y] key toggles Mask Mode 1 and Mask Mode 2.
3 Press the [ENT] key to lock the entry. When setting up with the remote controller, make sure
that “OK” is displayed on the transmission and reception display. If “NG” is displayed, press the
[ENT] key once again.
Sample display
2) How to change the rotary head speed (300, 600, 900 R.P.M.)
The rotary head speed can be set to 300, 600 or 900
R.P.M.
Press the menu key to display the menu screen. Use
the arrow keys to select the changing rotary head
speed and press the [ENT] key. When the head speed
starts flashing, select the desired speed using the
arrow keys and press the [ENT] key.
To Next Page
Loading...
Need help?
General
