36
OPTIONAL ACCESSORIES
10×MEASURING EYEPIECE
Use this accessory eyepiece in place of the normal eyepiece for measurements of both the
size and angle. The measuring eyepiece is extremely helpful when fitting toric contact lenses:
Specifications
Scales
Linear Scale: 16mm; minimum 0.5mm, increments to be used at 10×magnification
Angle Scale: 360°; minimum 5°readings
Diopter compensation: -5D to +3D
16×EYEPIECE
Increases the total magnification of the slit lamp.
Specifications
Total magnification: 16×, 25.6×
Field of view: 11.25mm dia, 9mm dia
Diopter compensation: -5D to +3D
To Next Page
Loading...
