Topens DKC2000S - Replacement Parts; Technical Specifications & Features; Features

6
Replacement Parts
ZZDCPYMJ3A
Control Board
ZZJCKG
Limit Switch
Magnet Assembly(N pole
& S pole)
Technical Specifications & Features
Specifications
Model:
DKC2000(S/Y)
Power input:
110~120V/60Hz
Motor voltage:
24VDC
Rated power:
550W
Gate moving speed:
20 cm/s (8 in/s)
Max gate weight:
2000kg (4400lbs)
Environmental conditions:
-20℃~ +50℃ (0°F to 120°F)
Protection class:
IP44
Features:
•Optional soft start and soft stop
•Midway mode
•Quick selection for the gate open/close direction
•Reliable rolling code technology for remote control
•Emergency release key in case of power failure
•Stop in case of obstruction during gate opening
•Optional stop/reverse in case of obstruction during gate closing
•Built in adjustable auto-close (1-250 seconds)
•Built in optional running timeout protection (travel time+45 seconds)
•Reliable electromagnetism limit for easy adjustment
•Can be equipped with a wide range accessories
•Easy to install, and minimum maintenance requirement
WARNING: Changes or modifications not expressly specified by this user manual, TOPENS could void
the warranty of this equipment.