Instruction Manual - TORBAL AGC Series
(F) Totalizing
Totalizing is used to add and total weighing results. To use this function, follow the steps below.
1. Place a container on the pan and press “T” to tare.
2. After taking a tare, place the first object on the pan.
Automatic
When set to Automatic, the weight of the object will be added automatically. Once the weight
stabilizes, the TOTAL indicator will appear on the display, signaling that the weight has been added to
the grand total.
Note: In Automatic and Semi-Automatic modes the minimum weighing mass must be equal to or
greater than 10d. To see this limit expressed in grams turn to detailed specifications on page 4.
69
To Next Page
Loading...
