Toro 03781TE - Front Hose Guide (Left); Front Hose Guide (Right); Installing the Cutting Units

g012628
Figure5
1.Hood-latchbracket2.Rivets
3.Removethehood-latchbracketfromthehood.
4.Whilealigningthemountingholes,positionthe
CElockbracketandthehood-latchbracketonto
thehood.
Note:Thelockbracketmustbeagainstthe
hood(Figure5).
Donottheremovebolt-and-nutassemblyfrom
thelock-bracketarm.
g012629
Figure6
1.CElockbracket
2.Bolt-and-nutassembly
5.Alignthewasherswiththeholesontheinsideof
thehood.
6.Rivetthebracketsandthewasherstothehood
(Figure6).
7.Hookthelatchontothehood-latchbracket
(Figure7).
g012630
Figure7
1.Hoodlatch
8.Screwtheboltintotheotherarmofhood-lock
brackettolockthelatchinposition(Figure8).
g012631
Figure8
1.Bolt
3.Armofthehood-lock
bracket
2.Nut
9.Tightentheboltsecurelybutdonottightenthe
nut.
3
InstallingtheCuttingUnits
Partsneededforthisprocedure:
1
Fronthoseguide(right)
1
Fronthoseguide(left)
Procedure
1.Removethereelmotorsfromtheshipping
brackets.
2.Removeanddiscardtheshippingbrackets.
3.Removethecuttingunitsfromthecartons.
13