Toro 03781TE - Locating the Jacking Points; Pushing or Towing the Machine

g200995
Figure37
1.Fronttie-downpoints2.Reartie-downpoint
LocatingtheJackingPoints
Note:Supportthemachinewithjackstands
wheneveryouworkunderthemachine.
Thejackingpointsareinthefollowinglocations:
•Onthefrontofthemachineontheframeonthe
insideofeachdrivetire
•Ontherearofthemachineatthecenteroftheaxle
PushingorTowingthe
Machine
Inanemergency,youcanmovethemachine
byactuatingthebypassvalveinthevariable
displacementhydraulicpumpandinstallinga
hydraulichosetobypassthecheckvalve,andthen
pushingortowingthemachine.
Important:Donotpushortowthemachinefaster
than3to4.8km/h(2to3mph)orformorethan
0.4km(1/4mile),becauseinternaltransmission
damagemayoccur.Thebypassvalvemustbe
openwheneveryoupushortowthemachine.
Additionally,youneedtoinstallahydraulichose
tobypassthecheckvalvewheneveryoupushor
towthemachineinreverse.
Ifyouneedtopushortowyourmachine,youwill
likelyneedtomoveitbothforwardandinreverse.
Toensurethatthedrivesystemdoesnotbecome
damagedfrompushingortowing,itisbesttoprepare
themachineforbothforwardandreversepushingor
towing.
PreparingtheMachineforPushing
orTowinginReverse
Important:Ifyouneedtopushortowthe
machineinreverse,youmustrstbypassthe
checkvalveinthe4-wheel-drivemanifold.
ThefollowingT oropartsareneededtobypassthe
checkvalve:
•ToroPartNo.59-7410,diagnostictting
•ToroPartNo.354-79,diagnostic-ttingcap
•ToroPartNo.95-8843,hydraulichose
•ToroPartNo.95-0985,couplertting(2)
•ToroPartNo.340-77,hydraulictting(2)
1.Installadiagnosticttingintheunmarkedport
locatedbetweenportsM8andP2ontherear
tractionmanifold(Figure38).
g033131
Figure38
1.Reartractionmanifold
(behindfrontleftwheel)
2.Unmarkedport
2.Connectahydraulichosebetweenthe
diagnosticttinginstalledinthereartraction
manifoldandthereversetractionpressuretest
port(Figure39).
Note:Usethehydraulicttingsandcoupler
ttingsasneededtoinstallthehose.
34