Toro 03781TE - Page 58

UseTororeplacementltersPartNo.94-2621for
therear(cuttingunit)ofthemachineandPartNo.
75-1310forthefront(charge)ofthemachine.
Important:Usinganothertypeofltermayvoid
thewarrantyonsomecomponents.
1.Parkthemachineonalevelsurface,lowerthe
cuttingunits,engagetheparkingbrake,shutoff
theengine,andremovethekey.
2.Cleantheareaaroundtheltermountingarea.
3.Placeadrainpanunderthelterandremove
thelter(Figure81andFigure82).
4.Lubricatethenewltergasketandllthelter
withhydraulicuid.
g009723
Figure81
1.Hydrauliclter
g200374
Figure82
1.Hydrauliclter
5.Ensurethattheltermountingareaisclean.
6.Screwthelteronuntilthegasketcontacts
themountingplate;thentightenthelteran
additional1/2turn.
7.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.
8.Shutofftheengineandcheckforleaks.
58