Toro 04042 - Adjusting the Handle Angle; Adjusting the Throttle Control; Turning on the Machine; Turning off the Machine

AdjustingtheHandleAngle
1.Removethehairpincottersfromthehandleretainers
oneachsideofthemower(Figure30).
g017355
1
2
Figure30
1.Hairpincotter2.Handleretainer
2.Whilesupportingthehandle,removethehairpin
cottersfromeachsideandpivotthehandletothe
desiredoperatingposition(Figure30).
3.Installthehandleretainersandhairpincotters.
AdjustingtheThrottleControl
1.Removetheconsolecover.
2.Loosenthe2fastenerssecuringthethrottlecontrol
(Figure31).
Figure31
1.Fasteners2.Throttlecontrol
3.Adjustthethrottlecontroltothedesiredposition.
4.Tightenthethrottle-controlfasteners.
5.Installthepreviouslyremovedconsolecover.
TurningontheMachine
1.EnsurethattheT-handleconnectoronthemain
wiringharnessisconnectedtothemainpowersupply
connector(Figure15).
2.Ensurethatthetractionandreeldriveleversarein
neutral.
3.MovethekeyswitchtotheStartpositionandholdit
untiltheInfoCenterLCDdisplaylightsup,thenrelease
ittotheRunposition.
TurningofftheMachine
1.Disengagethetractionandreeldrivecontrols.
2.TurnthekeyswitchtotheOffpositionandremove
thekey.
23