Toro 04042 - Setting the Machine to Match Turf Conditions

SettingtheMachinetoMatchTurfConditions
Usethefollowingtabletosetthemachinetomatchturfconditions.
Bedbars:StandardandOptional(Flex/eFlex2100Mowers)
PartNumberDescriptionAggressiveness
Comments
106-2468-01Non-AggressiveLessRed,standard
99-3794-03AggressiveMoreBlack
Bedbars:StandardandOptional(Flex/eFlex1800Mowers)
110-2282-01Non-AggressiveLessRed
110-2281-03AggressiveMore
Black,Standard
Bedknives:StandardandOptional(Flex/eFlex2100Mowers)
PartNumberDescription
Height-of-cutRangeComments
115-1880Microcut-EdgeMax
1.6to3.2mm(0.062to0.125inches)Standard
93-4262Microcut
1.6to3.2mm(0.062to0.125inches)
108-4303ExtendedMicrocut
1.6to3.2mm(0.062to0.125inches)
Lessaggressive
115-1881Tournament-
EdgeMax
3.2to6.4mm(0.125to0.25inches)
93-4263T ournament
3.2to6.4mm(0.125to0.25inches)
108-4302ExtendedT ournament
3.2to6.4mm(0.125to0.25inches)
Lessaggressive
93-4264
LowCut6.4mm(0.25inches)andup
Bedknives:StandardandOptional(Flex/eFlex1800Mowers)
117-1530Microcut-EdgeMax
1.6to3.2mm(0.062to0.125inches)Standard
98-7261Microcut
1.6to3.2mm(0.062to0.125inches)
110-2300ExtendedMicrocut
1.6to3.2mm(0.062to0.125inches)
Lessaggressive
98-7260T ournament
3.2to6.4mm(0.125to0.25inches)
117-1532Tournament-
EdgeMax
3.2to6.4mm(0.125to0.25inches)
110-2301
LowCut6.4mm(0.25inches)andup
30