Toro 04042 - Adjusting the Transmission Belt Tensioner; Controls System Maintenance; Adjusting the Reel Control

AdjustingtheTransmission
BeltTensioner
Thetransmissionbeltistensionedbyaspringloadedidler
pulley.Ifthebelttensionhastobeengaged/disengaged,usea
3/8inchwrenchtorotatetheengage/disengageshaft(Figure
47)tothedesiredposition.Rotatingtheshaft1/4turn
clockwisewilldisengagetheidlerfromthebelt(Figure48).
Note:Thebelttensionmustbedisengagedpriorto
removingthetransmissioncover.
Note:Thetransmissionbeltisproperlytensionedwhen
thealignmentmarksonthetransmissioncoverandthe
engagementshaftarealigned.
1
2
G019886
Figure48
1.Engaged2.Disengaged
ControlsSystem
Maintenance
AdjustingtheReelControl
Ifthereelcontroldoesnotproperlyengage,anadjustment
isrequired.
1.Turnoffthemachineanddisconnectthebatterypack.
2.Ensurethatthereelcontrolisdisengaged.
3.Atthetransmissionbulkhead,adjustthereelcontrol
cable(Figure49),toattainaspringlengthof70.6-72.4
mm(2.78-2.85inches).
1
2
G017384
Figure49
1.Reelcontrolcable2.Jamnuts
4.Atthecontrolhandlebulkhead,loosenthereelcontrol
cableuntilthereisslackinthecable(Figure50).
39