Greensmaster Flex 1800/1820/2100/2120 Page 7 − 3 Cutting Unit
General Information
Operator’s Manual
The Cutting Unit Operator’s Manual provides informa-
tion regarding the operation, general maintenance and
maintenance intervals for the cutting unit on your
Greensmaster machine. Additionally, if optional kits
have been installed on the cutting unit (e.g. grooming
reel), the installation instructions for the kit includes set−
up and operation information. Refer to those publica-
tions for additional information when servicing the
cutting unit.
Supporting Cutting Unit when Servicing
Whenever the cutting unit has to be tipped to expose the
bedknife or cutting reel, support the rear of the cutting
unit to make sure the lock nuts on the back of the bedbar
adjuster screws are not resting on the work surface.
1. Lock nut 2. Support
Figure 1
1
1
2
Cutting Unit
To Next Page
Loading...
