Toro 04044 - Transmission Idler System

Greensmaster Flex 1800/1820/2100/2120Traction and Reel Drive System Page 4 − 30
Transmission Idler System
Figure 37
1. Transmission cover
2. Engage/disengage shaft
3. Transmission belt
4. Extension spring
5. Main drive idler
6. Driven pulley (drum drive)
7. Flange bushing (4 used)
8. Cap screw (2 used)
9. Idler pulley bushing (2 used)
10. Ball bearing (6 used)
11. Idler pulley (2 used)
12. Idler pulley
13. Shoulder screw
14. Retaining ring
FRONT
RIGHT
15 to 17 ft−lb
(21 to 23 N−m)
3
1
2
4
9
10
11
12
13
14
8
10
10
7
6
5
7
7
Transmission removal from the machine is not neces-
sary to service the transmission idler system. Transmis-
sion idler components can be accessed by removing the
engine from the frame, removing the transmission cover
and then removing the drive belt.