Toro 22323 - Oil Filter Replacement; Changing the Oil Filter

Figure34
1.Oildrainplug
5.Whentheoilhasdrainedcompletely,replacethe
plug.
Note:Disposeoftheusedoilatacertiedrecycling
center.
6.Removetheoilllcapandslowlypourapproximately
80%ofthespeciedamountofoilinthroughthe
valvecover.
7.Checktheoillevel;refertoCheckingtheEngineOil
Levelin,page.
8.Slowlyaddadditionaloiltobringtheleveltothe
upperholeonthedipstick.
9.Replacethellcap.
ChangingtheOilFilter
1.Draintheoilfromtheengine;refertoChanging
theOil.
2.Placeashallowpanorragundertheltertocatchoil.
3.Removetheoldlter(Figure35)andwipethe
surfaceofthelteradaptergasket.
Figure35
1.Oillter
4.Pournewoilofthepropertypethroughthecenter
holeofthelter.Stoppouringwhentheoilreaches
thebottomofthethreads.
5.Allowaminuteortwofortheoiltobeabsorbedby
ltermaterial,thenpourofftheexcessoil.
6.Applyathincoatofnewoiltotherubbergasket
onthereplacementlter.
7.Installthereplacementoilltertothelteradapter.
Turntheoillterclockwiseuntiltherubbergasket
contactsthelteradapter,thentightenthelteran
additional1/2turn.
8.Fillthecrankcasewiththepropertypeofnewoil;
refertoChangingtheOil.
31