Toro 4045 - Machine Cleaning Procedures; Cleaning with Spray-Hose Attachment; Cleaning Plastic and Resin Parts

Cleaning
CleaningwiththeSpray-hose
Attachment
ServiceInterval:Beforeeachuseordaily
Themachinecomeswithaspray-hoseattachmentthatyou
canusetocleanthemachineandpipes.
Important:Donotsprayanyelectroniccomponentof
themachineandensurethatthehoodisdownbefore
cleaningthemachinewiththespray-hoseattachment.
Important:Iftheoutsidetemperatureisbelowfreezing,
refertoPreparingtheDrilling-uidSystemforCold
Weather(page111)beforecleaningthemachine.
Tousethespray-hoseattachment,performthefollowing
procedure:
1.Parkthemachineonalevelsurface.
2.Usingtherightjoystick,turnthedrilling-uidpumpto
theOffposition;refertoLowerButton(page39)in
RightJoystick—ModeI(page39).
3.Ensurethatthereisacleanwatersourcetoattachto
thedrilling-uidpump.
4.Ensurethatthevalveneartherearcompartmentisin
theclosedposition(Figure165).
Figure165
1.Valve
5.Connectthespray-hoseattachmenttothetting
(Figure166).
Figure166
1.Fittingforthespray-hoseattachment
6.Usingtherightjoystick,turnthedrilling-uidpumpto
theOnposition;refertoLowerButton(page39)in
RightJoystick—ModeI(page39).
7.Adjustthedrilling-uidowrateusingthetoggle
switchtochangethedesiredwaterpressure.
Note:RefertoToggleSwitch(page39)inRight
Joystick—ModeI(page39)toincreasethedrilling-uid
owrate.
Note:RefertoToggleSwitch(page40)inRight
Joystick—ModeII(page40)todecreasethe
drilling-uidowrate.
8.Usingthespray-hoseattachment,holddownthelever
andspraydownthemachineandpipes.
CleaningPlasticandResin
Parts
Avoidusinggasoline,kerosene,paintthinner,etc.,when
cleaningplasticwindows,theconsole,theinstrumentcluster,
themonitor,gauges,etc.Useonlywater,mildsoap,andasoft
clothwhenyoucleantheseparts.
Usinggasoline,kerosene,paintthinner,etc.,tocleanaplastic
orresinpartwillcauseittodiscolor,crack,ordeform.
114