Toro 4045 - Cab Positioning (Cab Model Only); Positioning Cab for Drilling Operation; Positioning Cab for Transport Mode; Cab Door Opening Procedure

PositioningtheCab(Model
withCabonly)
PositioningtheCabforDrilling
Operation
1.Pushbackontheswingrockerswitch(untilthecab
stops)toswingthecabtothedrillposition(Figure93).
Figure93
1.Swingrockerswitch
2.Rotaterockerswitch
Important:Ensurethatyouswingthecabout
completelybeforerotating,oryoumaycontactthe
machine,causingdamagetothecab.
2.Pushbackontherotaterockerswitchtorotatethecab
tothedesireddrillposition(Figure93).
PositioningtheCabintoTransport
Mode
1.Pushforwardontherotaterockerswitch(untilthe
cabstops)torotatethecabtothetransportposition
(Figure93).
Important:Ensurethatyoucompletelyrotatethe
cabtothetransportposition(clockwise)before
swining,oryoumaycontactthemachine,causing
damagetothecab.
2.Pushforwardontheswingrockerswitch(untilthe
cabstops)toswingthecabtothetransportposition
(Figure93).
OpeningtheDoor(Modelwith
Cabonly)
Openthedoorfromtheoutsidebypullingonthehandle,and
swingthedoortotheleft(Figure94).
Figure94
1.Doorhandle
Openthedoorfromtheinsidebypullingtheknobbackward
andpushingthedoortotheoutside(Figure95).
Figure95
1.Doorknob
77