Toro 4045 - Drive System Maintenance; Stakedown Planetary Drive Oil Level Check

Figure131
1.Groundpoint(unpainted
bolt)
4.Cover
2.Jumper-cableclamp
(negative)
5.Jumper-cableclamp
(positive)
3.Jumppost
7.Connectthepositive(+)jumpercabletothejumppost
(Figure131).
8.Connectthenegative(-)jumpercabletoaground
point,suchasanunpaintedboltorchassismember
(Figure131).
9.Starttheengine;refertoStartingandStoppingthe
Engine(page63).
Important:Iftheenginestartsandthenstops,
do not operatethestartermotoruntilthestarter
motorstopsturning.
Do not operatethestarter
motorformorethan30secondsatonetime.Wait
30secondsbeforeoperatingthestartermotorto
coolthemotorandtobuildupthechargeinthe
battery.
10.Whentheenginestarts,havetheotherperson
disconnectthenegative(-)jumpercablefromthe
frameandthendisconnectthepositive(+)jumper
cable(Figure131).
DriveSystem
Maintenance
CheckingtheOilLevelforthe
StakedownPlanetaryDrive
ServiceInterval:Aftertherst100hours—Checkthe
stakedownplanetary-driveoillevel(Also,
checkifexternalleakageisobserved).
Every500hours—Checkthestakedown
planetary-driveoillevel(Also,checkifexternalleakage
isobserved).
Oilspecication:SAE85W-140APIclassicationlevelGL4
Planetary-driveoilcapacity:approximately1.2L(2.5US
pt)
ToroPremiumGearOilisavailablefromanAuthorizedToro
ServiceDealer.Seethepartscatalogforpartnumbers.
1.Checktheoillevelonthesight-glassoneachstakedown
planetarydrive(Figure132).
Note:Theoillevelshouldcoverhalfofthesight-glass.
Figure132
1.Sight-glass
2.Breathercap
2.Removethebreathercapandaddtheoilintothe
planetarydriveuntiltheoillevelonthesight-glassisat
leasthalffull(Figure132).
3.Repeatfortheotherstakedownplanetary.
95