Toro 4045 - Tracks Planetary Drive Maintenance; Tracks Planetary Drive Oil Level Check; Tracks Planetary Drive Oil Change

CheckingtheOilLevelforthe
TracksPlanetaryDrive
ServiceInterval:Every50hours—Checkthetracksrotary
motorplanetary-driveoillevel(Also,
checkifexternalleakageisobserved).
Oilspecication:SAE85W-140APIclassicationlevelGL4
Planetary-driveoilcapacity:approximately1.4L(1.5US
pt)
ToroPremiumGearOilisavailablefromanAuthorizedToro
ServiceDealer.Seethepartscatalogforpartnumbers.
1.Parkthemachineonalevelsurface,stoptheengine,
andremovetheignitionkey.
2.Cleantheareaaroundtheoil-levelplugwithacleaning
solvent(Figure133).
Figure133
1.Oil-levelplug2.Oil-drainplug(6o’clock
position)
3.Removetheoil-levelplug(Figure133).
Note:Theoilleveliscorrectwhenitisuptothe
bottomoftheoil-levelplughole.
4.Iftheoilisbelowthebottomofthehole,addthe
speciedoiluntiltheoilislevelwiththebottomof
thehole.
5.Installandtightentheoil-levelplug.
ChangingtheOilfortheTracks
PlanetaryDrive
ServiceInterval:Aftertherst250hours—Changethe
planetary-driveoil.
Every800hours—Changetheplanetary-driveoil(or
yearly,whichevercomesrst).
Note:Changetheoilwhenitiswarm,ifpossible.
1.Parkthemachineonalevelsurface.
2.Cleantheareaaroundtheoil-levelplug(Figure133).
3.Rotatetheplanetarydriveuntiltheoil-drainplugis
directlybelowtheoil-levelplug(Figure133).
4.Stoptheengineandremovethekey.
5.Placeadrainpanundertheoil-drainplug.
6.Removetheoil-levelplugandtheoil-drainplug.
7.Installtheoil-drainplug.
8.Fillthechaindriveplanetarywithoiluntiltheoilis
evenwiththebottomoftheoil-levelplughole.
9.Installtheoil-levelplug.
10.Repeatsteps1through9tochangetheplanetary-drive
oilontheothersideofthemachine.
96