Toro 4045 - Machine Frame and Stabilizer Controls; Stabilizer Lever Operation; Drill Frame Tilt Lever Operation

EngineKeySwitch
Thekeyswitchhas3positionsasfollows(Figure45):
1
2
3
G0221 15
Figure45
1.Engine-offposition
3.Engine-startposition
2.Engine-runposition
•Engine-offposition—turnthekeytothispositiontostop
theengine.Youcannotstarttheenginefromtheoperator
platformwhenthekeyisinthisposition.
•Engine-runposition—turnthekeytothispositionafter
startingtheengine.Turningthekeytothisposition
alsoenablestheenginestartbuttonfromtheoperator
platform.
•Engine-startposition—turnthekeytothispositionto
starttheengine.ReleasethekeytotheRunpositiononce
theenginehasstarted.
Fluid-pumpSwitch
Usethisswitchtoturnontheuidpumptousethespraygun
whencleaningthemachine(Figure44).
Drill-pendantReceptacle
Plugthedrillpendantintothisreceptacletoattachittothe
machine(Figure44).
Drive-pendantReceptacle
Plugthedrivependantintothisreceptacletoattachittothe
machine(Figure44).
DrillFrameandStabilizerControls
Figure46
1.Drill-frametiltlever
3.Right-stabilizerlever
2.Left-stabilizerlever
StabilizerLevers
Usethestabilizerleverstoraiseandlowerthestabilizers.
Note:TheDrive/Drillswitchontheoperatorpanelmustbe
switchedtotheDrivepositionforthisfunctiontowork.
Drill-frameTiltLever
Usethedrill-frametiltlevertotiltthedrillframetoplace
thestake-downplateonthegroundortoreturntheframe
tothetravelposition.
Note:TheDrive/Drillswitchontheoperatorpanelmustbe
switchedtotheDrivepositionforthisfunctiontowork.
42