Toro 4045 - Drill Pendant Control Functions; Left Track and Rotary Control Switch; Drilling Fluid and Wrench Control Switch; Right Track and Carriage Control Switch

DrillPendant
WARNING
Onlyanauthorizedperson(s)shouldoperatethe
drillpendant.Personalinjury,harmtoothers,or
damagetothemachinecouldoccurifthispendant
ismisused.
Thedrillpendant(alsoreferredtoasthelife-jacketpendant)
isdesignedtoallowyourudimentarycontroloverthedrilling
featureswhenconnectedtothefrontreceptacle,shouldthe
operatorplatformcontrolsbecomenon-responsive.Youcan
alsoplugthispendantintothedrive-pendantreceptacleat
therearcontrolpanel,intheeventthatthedrivependant
malfunctionstoobtainbasicmovementfunctionsatslow
speed.
RefertoFigure44forthelocationofthedrillpendant.
Figure48
1.Left-track-control
switch/rotary-control
switch
6.Pipe-grip-controlswitch
2.Drillinguidand
wrench-controlswitch
7.Pipe-clamp-controlswitch
3.Right-track-control
switch/carriage-control
switch
8.Cam-rotation-control
switch
4.Breakout-wrench-control
switch(upperwrench)
9.Pipe-elevator-control
switch
5.Drill-spindle-controlswitch
10.Stationary(for
lowerwrench)
pipe-clamp-controlswitch
Left-track-controlSwitch/Rotary-controlSwitch
Whenthisswitchisconnectedtothedrive-pendant
receptacle,moveittocontrolthemovementoftheleft
track.
•Movetheswitchforwardtomovethelefttrackforward.
•Movetheswitchbackwardtomovethelefttrack
backward.
Whenthisswitchisconnectedtothefrontdrill-pendant
receptacle,moveittocontroltherotationofthepipe.
•Movetheswitchforwardtorotatethepipeclockwise.
•Movetheswitchbackwardtorotatethepipe
counterclockwise.
DrillingFluidandWrench-controlSwitch
Whenthisswitchisconnectedtothefrontdrill-pendant
receptacle,moveittocontrolthedrilling-uidowor
thewrenchoperation.
•Movetheswitchtothelefttoturnthedrillinguidto
theOnposition.
•Movetheswitchtotherighttoturnwrenchoperationto
theOnposition.
Right-track-controlSwitch/Carriage-controlSwitch
Whenthisswitchisconnectedtothedrive-pendant
receptacle,moveittocontrolthemovementoftheright
track.
•Movetheswitchforwardtomovetherighttrackforward.
•Movetheswitchbackwardtomovetherighttrack
backward.
Whenthisswitchisconnectedtothefrontdrill-pendant
receptacle,moveittocontrolthemovementofthe
carriage.
•Movetheswitchforwardtomovethecarriageforward.
•Movetheswitchbackwardtomovethecarriagebackward.
Breakout-wrench-controlSwitch
Whenthisswitchisconnectedtothefrontdrill-pendant
receptacle,moveittocontrolthewrenchbreakoutand
makeup.
•Movetheswitchforwardforwrenchbreakout(forupper
wrench).
•Movetheswitchbackwardforwrenchmakeup(forupper
wrench).
44