Toro 74096 - Troubleshooting Machine Behavior; Machine Pulls Left or Right; Abnormal Vibration and Uneven Cutting; Blade Rotation and Clutch Engagement Issues

5-11
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
CHASSIS
Chassis
Caster Fork Assembly and Bearing (Cont.)
Removal (Cont.)
8. Remove the upper and lower taper bearings from the frame (Figure 10). Inspect bearing races for damage and
excessive wear.
9. Replace the bearings and races if worn.
Figure 10