Toro 74991 - Driving Backward; Stopping the Machine; Adjusting the Height of Cut; Using the Transport Lock

g008952
Figure23
DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,lookbehindandslowlypullthe
motion-controlleversrearward(Figure24).
g008953
Figure24
StoppingtheMachine
Tostopthemachine,movethetractioncontrollevers
toneutralandtothelockedposition,disengagethe
powertake-off(blade-controlswitch(PTO),andturn
theignitionkeytooff.
Settheparkingbrakewhenyouleavethemachine;
refertoSettingtheParkingBrakeinOperation.
Remembertoremovethekeyfromtheignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhile
itisunattended.
Alwaysremovetheignitionkeyandsetthe
parkingbrakewhenleavingthemachine
unattended,evenifjustforafewminutes.
AdjustingtheHeightofCut
UsingtheTransportLock
Thetransportlockhas2positionsandisusedwiththe
deckliftpedal.Thereisalockpositionandanunlock
positionforthetransportposition.Thetransportlock
isusedwiththedeckliftpedal.RefertoFigure25
25