Toro e-Dingo 500 - Pre-Maintenance Procedures; Using Cylinder Locks; Installing Cylinder Locks; Removing and Storing Cylinder Locks

Pre-Maintenance
Procedures
UsingtheCylinderLocks
WARNING
Theloaderarmsmaylowerwhenintheraised
position,crushinganyoneunderthem.
Installthecylinderlock(s)beforeperforming
maintenancethatrequiresraisedloaderarms.
InstallingtheCylinderLocks
1.Removetheattachment.
2.Raisetheloaderarmstothefullyraisedposition.
3.Shutoffthemachineandremovethekey.
4.Positionacylinderlockovereachlift-cylinder
rod.
g421593
Figure26
1.Cylinderlock3.Lift-cylinderrod
2.Pin(2)
5.Secureeachcylinderlockwith2pins.
6.Slowlylowertheloaderarmsuntilthecylinder
lockscontactthecylinderbodiesandrodends.
RemovingandStoringthe
CylinderLocks
Important:Removethecylinderlocksfromthe
rodsandfullysecuretheminthestorageposition
beforeoperatingthemachine.
1.Startthemachine.
2.Raisetheloaderarmstothefullyraisedposition.
3.Shutoffthemachineandremovethekey.
4.Removethepinssecuringeachcylinderlock.
5.Removethecylinderlocks.
6.Placethecylinderlocksonthepostsonthe
sidesofthemachineandsecurewiththepins.
7.Lowertheloaderarms.
27