Toro e-Dingo 500 - Cleaning; Removing Debris; Washing the Machine

Note:Disposeofuseduidatacertied
recyclingcenter.
9.Installthefanshroud.
10.Installthelowerfrontcoverandthehood.
11.Removeandstorethecylinderlocksandlower
theloaderarms.
Cleaning
RemovingDebris
ServiceInterval:Beforeeachuseordaily
1.Parkthemachineonalevelsurface,remove
anyattachment,raisetheloaderarms,and
installthecylinderlocks.
2.Shutoffthemachineandremovethekey.
3.Cleananydebrisfromthemachine.
Important:Blowthedirtoutratherthan
washitout.Ifyouusewater,keepitaway
fromelectricalitemsandhydraulicvalves.
Cleanelectricalconnectorsusing
compressedair;donotusecontactcleaner.
4.Removeandstorethecylinderlocksandlower
theloaderarms.
WashingtheMachine
Ifyoumustpressurewashthemachine,dothe
following:
Important:Donotcleanthemachinewithwater
whileitischarging.Ensuremachineisdrybefore
charging.
•Wearappropriatepersonalprotectiveequipment
forthepressurewasher.
•Keepallguardsinplaceonthemachine.
•Avoidsprayingatelectroniccomponents.
•Avoidsprayingatedgesofdecals.
•Spraytheexteriorofthemachineonly.Donot
spraydirectlyintoopeningsinthemachine.
•Sprayonlythedirtypartsofthemachine.
•Usea40-degreeorlargerspraynozzle.40-degree
nozzlesareusuallywhite.
•Keepthetipofthepressurewasheratleast61cm
(2ft)awayfromthesurfacebeingwashed.
•Useonlypressurewasherswithpressurebelow
13790kpa(2000psi)andowbelow7.6L(2US
gallons)perminute.
•Replacedamagedorpeelingdecals.
•Greaseallgreasepointsafterwashing;referto
GreasingtheMachine(page29).
37