Toro e-Dingo 500 - Accessing Internal Components; Removing the Hood; Removing Lower Front Cover

AccessingInternal
Components
WARNING
Openingorremovingcovers,hoods,and
screenswhilethemachineisrunningcould
allowyoutocontactmovingparts,seriously
injuringyou.
Beforeopeninganyofthecovers,hoods,and
screens,shutoffthemachine,removethekey
fromthekeyswitch,andallowthemachine
tocool.
WARNING
Therotatingfancancausepersonalinjury.
•Donotoperatethemachinewithoutguards
inplace.
•Keepyourngers,hands,andclothing
clearoftherotatingfan.
•Shutoffthemachineandremovethekey
beforeperformingmaintenance.
RemovingtheHood
1.Parkthemachineonalevelsurface.
2.Shutoffthemachine,removethekey,andwait
formovingpartstostop.
3.Removethe4bolts(3/8x1-1/2inches)securing
thehood.
g387431
Figure27
4.Pullthehoodoffthemachine.
Reversetheproceduretoinstallthehood.
RemovingtheLowerFront
Cover
1.Parkthemachineonalevelsurface.
2.Raisetheloaderarmsandinstallthecylinder
locks.
Note:Ifyoucannotraisetheloaderarmsusing
themachinepower,pulltheloader-armlever
rearwardanduseahoisttolifttheloaderarms
attheirliftpoints.
3.Shutoffthemachine,removethekey,andwait
formovingpartstostop.
4.Removethehood.
5.Removethe2bolts(3/8x1inch)securingthe
cover.
g387443
Figure28
6.Removethecover.
Reversetheproceduretoinstallthecover.
28