Toro e-Dingo 500 - Changing Drive-Motor Gear Oil

ChangingtheDrive-Motor
GearOil
ServiceInterval:Aftertherst50hours
Every500hours
1.Startthemachineanddriveitfor5minutes.
Note:Thiswarmsthegearoilsothatitdrains
better.
2.Parkthemachineonalevelsurfacesothat
adrainplugonthemotorisinthe6o’clock
position.
g387302
Figure34
3.Shutoffthemachineandremovethekey.
4.Raisethemachineoffthegroundsothatthe
wheelsareofftheground.Supportthemachine
usingjackstands.
Note:Usejackstandsratedforyourmachine.
RefertotheSpecications(page15)forthe
weight.
WARNING
Mechanicalorhydraulicjacksmayfailto
supportthemachineandcauseserious
injury.
Usejackstandswhensupportingthe
machine.
5.Removetherearwheels.
6.Placeadrainpanunderthedrivemotor.
7.Removebothplugsandallowthegearoilto
drain.
8.Installthelowerplug.
9.Fillthedrivemotorwithgearoilthroughtheopen
holeuntiltheoilisuptothebottomofthehole.
Note:Youmaynotneedthefullcapacity
amountduetoresidualoilinthemotor.
g387301
Figure35
10.Installtheplug.
11.Repeattheprocedurefortheotherdrivemotors.
12.Startthemachineandengagethetraction
controlitforafewminutes.
13.Stopthemachinesothatadrainplugoneach
motorisinthe3o’clockposition,shutoffthe
machine,andremovethekey.
14.Removethepluginthe3o’clockposition,and
verifythattheoillevelisatthebottomofthe
hole.Addoilasneeded.
15.Installtheplugandtorqueallplugsto5to6N∙m
(50to60in-lb).
16.Installthetiresandtorquethelugnuts61to75
N∙m(45to55ft-lb).
17.Lowerthemachinetotheground.
32