Toro e-Dingo 500 - Maintaining the Battery Charger; Servicing the Fuses; Drive System Maintenance; Checking Tire Treads

Immediatelydrivethemachinetoacoollocation
outofthesun,turnoffthemachine,andallowthe
batteriestocoolfullybeforeresumingoperation.
Ifthebatteriescontinuetooverheat,anotheralert
appearsontheInfoCenterandthemachinewill
shutoff.
•Uselightsonlywhenitisnecessary.
MaintainingtheBattery
Charger
Important:Allelectricalrepairsshouldbe
performedbyanAuthorizedServiceDealeronly.
Theoperatorcanperformverylittlemaintenanceother
thanprotectingthechargerfromdamageandweather.
•Cleanthechargercordwithaslightlydampcloth
aftereachuse.
•Coilthecordandplaceitintothestorage
compartmentwhennotinuse.
•Periodicallyexaminethecordfordamage,and
replacethemwhennecessarywithToro-approved
parts.
ServicingtheFuses
1.Parkthemachineonalevelsurface.
2.Shutoffthemachineandremovethekey.
3.Removethehood;refertoRemovingtheHood
(page28).
4.Turnthebattery-disconnectswitchtotheOFF
position.
5.Testorreplacethefusesasdescribedinthe
ServiceManualforthemachine.
g390518
Figure33
1.Fuse—200A(3)
6.Turnthebattery-disconnectswitchtotheON
position.
7.Installthehood.
DriveSystem
Maintenance
CheckingtheTireTreads
ServiceInterval:Beforeeachuseordaily
Checkthetiretreadsforwear.Replacethetireswhen
thetreadsarewornandshallow.
CheckingtheWheel-Lug
Nuts
ServiceInterval:Aftertherst8hours
Every100hours
Checkandtorquethewheellugnuts61to75N∙m
(45to55ft-lb).
Drive-MotorGearOil
Specications
Oiltype:Mobil626SHC
Capacity:0.31L(10.5oz)pergearbox
31