Toro e-Dingo 500 - Checking Hydraulic-Fluid Level

Checkingthe
Hydraulic-FluidLevel
ServiceInterval:Every25hours
Checkthehydraulic-uidlevelbeforethemachineis
rststartedandafterevery25operatinghours.
RefertoHydraulicFluidSpecications(page34).
Important:Alwaysusethecorrecthydraulic
uid.Unspecieduidswilldamagethehydraulic
system.
1.Parkthemachineonalevelsurface,remove
anyattachment,raisetheloaderarms,and
installthecylinderlocks.
2.Shutoffthemachine,removethekey,andallow
themachinetocool.
3.Removethehoodandlowerfrontcover.
4.Removethefanshroud.
g390548
Figure38
1.Bolt—3/8x1inch(2)
2.Fanshroud
5.Cleantheareaaroundthellerneckofthe
hydraulictank.
g390547
Figure39
6.Removetheller-neckcapandchecktheuid
levelonthedipstick.
Theuidlevelshouldbebetweenthemarkson
thedipstick.
g421601
Figure40
1.Fillerneckcap2.Dipstick
7.Ifthelevelislow,addenoughuidtoraiseitto
theproperlevel.
8.Installtheller-neckcap.
9.Installthefanshroud.
10.Installthelowerfrontcoverandhood.
11.Removeandstorethecylinderlocksandlower
theloaderarms.
35