Toro e-Dingo 500 - Controls System Maintenance; Adjusting the Controls; Hydraulic System Maintenance; Hydraulic System Safety

ControlsSystem
Maintenance
AdjustingtheControls
Thefactoryadjuststhecontrolsbeforeshippingthe
machine.However,aftermanyhoursofuse,you
mayneedtoadjustthetractioncontrolalignment,
theNEUTRALpositionofthetractioncontrol,andthe
trackingofthetractioncontrolinthefullforward
position.
ContactyourAuthorizedServiceDealertoadjustthe
controlsofyourmachine.
HydraulicSystem
Maintenance
HydraulicSystemSafety
•Seekimmediatemedicalattentionifuidisinjected
intoskin.Injecteduidmustbesurgicallyremoved
withinafewhoursbyadoctor.
•Ensurethatallhydraulic-uidhosesandlinesare
ingoodconditionandallhydraulicconnections
andttingsaretightbeforeapplyingpressureto
thehydraulicsystem.
•Keepyourbodyandhandsawayfrompinhole
leaksornozzlesthatejecthigh-pressurehydraulic
uid.
•Usecardboardorpapertondhydraulicleaks.
•Safelyrelieveallpressureinthehydraulicsystem
beforeperforminganyworkonthehydraulic
system.
RelievingHydraulic
Pressure
Torelievehydraulicpressurewhilethemachine
ison,disengagetheauxiliaryhydraulicsandfully
lowertheloaderarms.Turnthekeyswitchtothe
AUXILIARYHYDRAULICRELIEFpositionandpressthe
auxiliary-hydraulicswitchbackandforth.
g393575
Figure36
33