Greensmaster 3150Page 5 -- 4Electrical System
Dielectric Lubricant/Sealant
Dielectric lubricant should be used to prevent corrosion
of connection terminals. To ensure complete coating of
terminals, liberally apply lubricant to both component
and wire harness connector, plug connector to compo-
nent, unplug connector, reapply lubricant to both sur-
faces and reconnect harness connector to component.
Connectors should be thoroughly packed with lubricant
for effective results.
Toro Part Number: 107--0342
Figure 4
Battery Hydrometer
Use the Battery Hydrometer when measuring specific
gravity of battery electrolyte. Obtain this tool locally.
Figure 5
To Next Page
Loading...
