Greensmaster 3150Groomer Page 8 -- 2
Specifications
MOUNTING: The groomer is mounted to the DPA cut-
ting unit side plates. The drive assembly for the groom-
ingreelislocatedon theopposite sideofthecuttingunit
from the hydraulic cutting reel motor.
GROOMING REEL CONSTRUCTION: 2.375 inch (6
cm) diameter, 41 steel blades with 1/2 inch blade spac-
ing.Bladespacingcanbeadjustedto1/4inchor3/4inch
byaltering thenumber andposition ofblade spacerson
thegroomer. Groomerbrush canbe installedin placeof
grooming reel.
GROOMER HEIGHT SETTING: From 0.030 to 0.620
inch (0.8 to 15.7 mm) at mowing HOC rangeof 0.060 to
0.750inch(1.5to19.1mm).
WIDTH--OF--GROOMER: 19.380 inches (49.2 cm).
HEIGHT ADJUSTMENT KNOB: Allows a 0.003 inch
(0.08mm)incrementof heightadjustmentforeachclick
of the adjuster.
UP--DOWN FEATURE: Allows grooming reel to be
raisedabovetheheight/depthadjustmentfornogroom-
ing reel action while cutting.
To Next Page
Loading...
