Toro Groundsmaster 5910 - Lubrication; Greasing Bearings and Bushings

Lubrication
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours—Lubricateall
greasettings.
Themachinehasgreasettingsthatyoumust
lubricateregularlywithNo.2lithiumgrease.Also,
lubricatethemachineimmediatelyafterevery
washing.
TractionUnit
•2impactarms(Figure80)
•2frontdeck-lift-cylinderpivots(Figure80)
•2sidedeck-lift-cylinderpivots(Figure80)
•4steering-cylinder-balljoints(Figure81)
•2tie-rod-balljoints(Figure81)
•2king-pinbushings(Figure81)
•1rearaxle-pivotbushing(Figure82)
g031674
Figure80
g008855
Figure81
g009249
Figure82
65