Toro Groundsmaster 5910 - Cooling System Maintenance; Cooling System Safety; Checking Engine-Cooling System

CheckingtheRearWheel
Toe-In
ServiceInterval:Every1,000hours—Checktherear
wheeltoe-in.
1.Withthereartiresinastraightposition,measure
theoutsidedistance(ataxleheight)atthefront
andrearofthereartires(Figure115).
Note:Thefrontmeasurementshouldbe0
to3mm(0to0.12inch)greaterthantherear
measurement.
g034932
Figure115
1.Outsidedistance
2.Tie-rodclamps
2.Toadjustthetoe-in,loosentheclampsatboth
endsofthetierods(Figure115).
3.Rotatethetie-rodtomovethefrontofthetire
inwardoroutward.
4.Onceyouachievethecorrecttoe-in,tightenthe
tie-rodclamps.
CoolingSystem
Maintenance
CoolingSystemSafety
•Swallowingenginecoolantcancausepoisoning;
keepoutofreachfromchildrenandpets.
•Dischargeofhot,pressurizedcoolantortouching
ahotradiatorandsurroundingpartscancause
severeburns.
–Alwaysallowtheenginetocoolatleast15
minutesbeforeremovingtheradiatorcap.
–Usearagwhenopeningtheradiatorcap,and
openthecapslowlytoallowsteamtoescape.
•Donotoperatethemachinewithoutthecovers
inplace.
•Keepyourngers,handsandclothingclearof
rotatingfananddrivebelt.
Checkingthe
Engine-CoolingSystem
ServiceInterval:Beforeeachuseordaily—Check
theengine-coolantlevelinthe
overowreservoir.
Every100hours—Inspectthecooling-system
hoses.
Thecapacityofthesystemonamachinewithouta
cabis10.4L(13.5USqt)andwithacabis17L(18
USqt).
Recommendedcoolant:Ethelyneglycolanti-freeze
andwater(50/50blend).
DANGER
Therotatingfansanddrivebeltscancause
personalinjury.
•Donotoperatethemachinewithoutthe
coversinplace.
•Keepyourngers,hands,andclothing
clearoftherotatingfananddrivebelt.
•Shutofftheengine,removethekey,
andturnthebattery-disconnectswitch
totheOFFpositionbeforeperforming
maintenance.
80