Toro MB TX 2500S - Starting the Engine; Shutting Off the Engine; Operating the Hopper

StartingtheEngine
1.Engagetheparkingbrake.
2.Engagethechoke.
Note:Awarmorhotenginemaynotrequire
choking.Youmayneedtorepeatthestarting
cyclewhenyoustarttheengineforthersttime
afteryouhavelledacompletelyemptyfuel
systemwithfuel.
Note:Letthemachinestayatlowidlefor
3minuteswhenstartingthemachineina
temperaturebelow30°F.
3.MovethethrottlebetweentheFASTandSLOW
positions.
4.TurnthekeyswitchtotheSTARTposition.
5.Whentheenginestarts,disengagethechoke.
Important:Donotengagethestarterformore
than5secondsatatime.Iftheenginefailstostart,
allowa15-secondcool-downperiodbetween
attempts.Failuretofollowtheseinstructionscan
burnoutthestarter.
g038313
Figure9
ShuttingOfftheEngine
1.MovethethrottlebetweentheFASTandSLOW
positions.
2.Engagetheparkingbrake.
3.TurnthekeyswitchtotheOFFpositionand
removethekey.
g038314
Figure10
OperatingtheHopper
Hoppercapacity:1134kg(2,500lb)
Knowtheloadcapacityofthemachineandnever
exceedit.Thismachinenormallyoperatesonuneven,
unpaved,bumpy,and/orinclinedsurfaces—adjustthe
loadaccordingly.
1.Positionthemachinewhereyouintendtodump
theload.
2.Turnthehopperleftorrightbypushingtheleft
orrightsideoftheswivelswitch.
3.Dumpthehopperbypushingthetopofthe
dumpswitch.
4.Lowerthehopperbypushingthebottomofthe
dumpswitch.
Note:Ifyouholdthebottomoftheswitch
0.2to1.3seconds,thehopperfullylowers
automatically.
14