Toro MB TX 2500S - Replacing the Hydraulic Filter for the Lift and Slew System; Checking the Hydraulic Lines

ReplacingtheHydraulicFilterfor
theLiftandSlewSystem
ServiceInterval:Every300hours
Important:Donotsubstituteanautomotiveoil
lterorseverehydraulicsystemdamagemay
result.
1.Parkthemachineonalevelsurface,move
themotion-controlleverstotheNEUTRAL-LOCK
position,engagetheparkingbrake,raisethe
hopper,andinstallthecylinderlock.
2.Shutofftheengine,andremovethekey.Allow
theenginetocool.
3.ReplacethelterasshowninFigure56.
g186042
g027477
Figure56
4.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.
5.Shutofftheengineandcheckforleaks.
6.Checktheuidlevelinthereservoirtank,refer
toCheckingtheHydraulic-FluidLevelfortheLift
andSlewSystem(page36).
Note:Donotoverllthereservoirtank.
7.Removethecylinderlockandlowerthehopper.
CheckingtheHydraulic
Lines
ServiceInterval:Every40hours—Checkthe
hydrauliclinesforleaks,loose
ttings,kinkedlines,loosemounting
supports,wear,anddeterioration.
(Makenecessaryrepairsbefore
operating.)
WARNING
Hydraulicuidescapingunderpressurecan
penetrateskinandcauseinjury.Fluidinjected
intotheskinmustbesurgicallyremoved
withinafewhoursbyadoctorfamiliarwith
thisformofinjury;otherwise,gangrenemay
result.
•Keepyourbodyandhandsawayfrom
pinholeleaksornozzlesthateject
high-pressurehydraulicuid.
•Usecardboardorpapertondhydraulic
leaks;neveruseyourhands.
38