Toro Reelmaster 5410-D - Setting Machine Parameters

SettingstoON,setthePINcode,andturnthe
keyintheignitionswitchtotheOFFpositionand
thentotheONposition.
SettingtheServiceDueTimer
Theserviceduetimerresetstheservicedue
hoursafterascheduledmaintenanceprocedureis
performed.
1.IntheSettingsMenu,usethecenterbuttonto
scrolldowntothePROTECTEDMENUandpress
therightbutton.
2.EnterPIN;refertoAccessingProtectedMenus
ontheOperator’sManualforyourmachine.
3.IntheServiceMenu,navigatetotheHOURS
MENU.
4.Scrolldowntotheservicesymbol
.
Note:Ifserviceiscurrentlydue,thersticon
showsNOW.
5.Belowthersticonistheserviceintervalitem
(timeinterval,e.g.250,500,etc.)
Note:Serviceintervalisaprotectedmenuitem.
6.Highlighttheserviceintervalandpresstheright
button.
7.Whenthenewscreenappears,conrmRESET
SERVICEHOURS—AREYOUSURE?
8.SelectYES(centerbutton)orNO(leftbutton).
9.AfteryouselectYEStheintervalscreenclears,
andrevertsbacktotheServiceHoursselections.
SettingtheBladeCount
1.IntheSettingsMenu,scrolldowntoBlade
Count.
2.Presstherightbuttontochangethebladecount
between8or11bladereels.
SettingtheHeightofCut(HOC)
1.IntheSettingsMenu,scrolldowntoHOC.
2.PresstherightbuttontoselectHOC.
3.Usethecenterandrightbuttontoselectthe
appropriateHOCsetting.(Iftheexactsettingis
notdisplayed,selectthenearestHOCsetting
fromthelistdisplayed).
4.PresstheleftbuttontoexitHOCandsavethe
setting.
SettingtheFrontandRearReel
Speeds
Althoughthefrontandrearreelspeedsarecalculated
byinputtingthenumberofblades,mowspeedand
HOCintotheInfoCenter,thesettingcanbemanually
changedtoaccommodatefordifferentmowing
conditions.
1.TochangetheReelSpeedSettings,scrolldown
totheFReelRPM,RReelRPM,orboth.
2.Presstherightbuttontochangethereelspeed
value.Asyouchangethespeedsetting,the
displaycontinuestoshowthecalculatedreel
speedbasedonbladecount,mowspeedand
HOC,whichwaspreviouslyentered,butthe
newvalueisalsodisplayed.
ToAccessProtectedDisplay
Screens
Fromthemainscreen,pressthecenterbuttononce,
whenthearrowsappearabovethebuttons,press
thecenterbuttonagaintoscrollthroughthedisplay
screens.
PressthecenterbuttonagaintoaccesstheeReel
informationscreendisplayingthereelcurrentandthe
speedforeachofthe5cuttingunits.
Pressthecenterbuttonagaintoaccesstheenergy
modescreendisplayingthecomponents,energyow
andthedirectionwhileinoperation.
SettingtheMaximumAllowed
MowSpeed
TheselectedsettingisdisplayedasanXonthe
traction-speedbargraphalongwiththecruisecontrol
andpedalstopsettings.AnXinabardenotesthatthe
maximumspeedislimitedbythesupervisor(Figure
51orFigure53).
Note:Thissettingisretainedinmemoryandapplied
tothetractionspeeduntilyouchangeit.
1.IntheSettingsMenu,scrolldowntoMowSpeed
andpresstherightbutton.
2.Usetherightbuttontoincreasethemaximum
mowspeedin0.8km/h(0.5mph)increments
between1.6and12.9km/h(1.0and8.0mph).
3.Usethecenterbuttontodecreasethemaximum
mowspeedin0.8km/h(0.5mph)increments
between1.6and12.9km/h(1.0and8.0mph).
4.Presstheleftbuttontoexit.
SettingtheMaximumAllowed
TransportSpeed
TheselectedsettingisdisplayedasanXonthe
traction-speedbargraphalongwiththecruisecontrol
andpedalstopsettings.AnXinabardenotesthatthe
maximumspeedislimitedbythesupervisor(Figure
51orFigure53).
32