Toro Workman MD - Lubrication; Greasing the Machine

ClosingtheHood
1.Gentlylowerthehoodontothechassis.
2.Securethehoodbyaligningtherubberlatchesontothe
latchanchorsateachsideofthehood(Figure25).
Lubrication
GreasingtheMachine
ServiceInterval:Every100hours/Yearly(whichevercomes
rst)—Greasethebearingsandbushings.
Greasethemachinemorefrequently
whenusingitforheavy-dutyoperations.
GreaseType:Number2general-purpose,lithium-based
grease
1.Usearagtowipethegreasettingcleansothatforeign
mattercannotbeforcedintothebearingorbushing.
2.Withagreasegun,apply1or2pumpsofgreaseinto
thegreasettingsonthemachine.
3.Wipetheexcessgreaseoffthemachine.
Thegreasettingsarelocatedatthe4tie-rodends(Figure
26)andthe2kingpins(Figure27).
Figure26
Leftsideshown
1.Greasetting
2.Tierod
Figure27
Leftsideshown
1.Greasetting(kingpin)
28