Toro Workman MD - Maintaining the Primary-Drive Clutch; Cooling System Maintenance; Cleaning the Engine Cooling Areas

MaintainingthePrimary-Drive
Clutch
ServiceInterval:Every400hours/Yearly(whichevercomes
rst)
CAUTION
Thedustintheclutchwillbecomeairborneand
coulddamageyoureyesoryoucouldinhaleit
causingbreathingdifculties.
Wearsafetygogglesandadustmaskorothereye
andrespiratoryprotectionwhenperformingthis
procedure.
1.Raiseandlatchthecargobox;refertoRaisingthe
CargoBox(page17).
2.Removethe3boltssecuringthecovertotheclutch,
andremovethecover(Figure53).
Note:Retainthecoverandboltsforinstallation.
1
2
Figure53
1.Cover
2.Bolts
3.Thoroughlycleantheinsideofthecoverandtheinner
componentsoftheclutchusingcompressedair.
4.Installtheclutchcoverandsecureitwiththe3bolts
(Figure53)thatyouremovedin2.
5.Lowerthecargobox;refertoLoweringtheCargoBox
(page17).
CoolingSystem
Maintenance
CleaningtheEngineCooling
Areas
ServiceInterval:Every100hoursCleanthecoolingsystem
twiceasoftenduringspecialoperating
conditions;refertoMaintainingthe
VehicleunderSpecialOperating
Conditions.
Important:Operatingtheenginewithablocked
rotatingscreen,dirtyorpluggedcoolingns,orcooling
shroudsremovedwillcauseenginedamagedueto
overheating.
Important:Nevercleantheenginewithapressure
washerbecausewatercouldcontaminatethefuelsystem.
Cleantherotatingscreen,coolingns,andexternalsurfaces
oftheengine.
Note:Cleantheenginecoolingcomponentsmoreoften
underextremelydustyanddirtyconditions.
42