Toro Workman MD - General Information

3.Connectthebatteryandclosethehood;referto
ConnectingtheBattery(page36).
DriveSystem
Maintenance
MaintainingtheTires
ServiceInterval:Every100hours—Checktheconditionof
thetiresandrims.
Every100hours—Torquethewheel-lugnuts.
1.Inspectthetiresanrimsforsignsofwearanddamage.
Note:Operatingaccidents,suchashittingcurbs,can
damageatireorrimandalsodisruptwheelalignment,
soinspecttireconditionafteranaccident.
2.Torquethewheel-lugnutsto61to88N-m(45to
65ft-lb).
AdjustingtheFrontWheel
Toe-inandCamber
ServiceInterval:Every100hours/Yearly(whichevercomes
rst)—Checkthefrontwheeltoe-inand
camber.
Important:Youwillneedtoobtaintoolnumber
TORO6010fromyourToroDistributortoperformthis
procedure.
Thetoe-inshouldbe0to6mm(0to1/4inch)andthe
cambershouldbe0+1/2degree,i.e.,thebottomofthewheel
rimsangledin2.3mm(0.09inch)morethanthetop,withthe
followingparameters:
•Checkthetirepressuretoensurethatthefronttiresare
inatedto82kPa(12psi).
•Either,addweighttothedriver'sseatequaltotheaverage
operatorwhowillrunthemachine,orhaveanoperator
sitontheseat.Theweightoroperatormustremainon
theseatforthedurationoftheprocedure.
•Onalevelsurface,rollthemachinestraightback2to3
m(6to10ft)andthenstraightforwardtotheoriginal
startingposition.Thiswillallowthesuspensiontosettle
intotheoperatingposition.
•Measurethetoe-inwiththewheelsfacingstraightahead.
1.Tocheckthecamber,placea90degreesquareonthe
groundwiththeverticaledgetouchingthefaceofthe
tire(Figure44).
38