Toro Workman MD - Page 31

Figure31
1.Engine-oil-drainplug3.Primarydriveclutch
2.Engine
6.Removethedrainplug(Figure31).
Note:Allowtheoiltocompletelydrainfromthe
engine.
7.Installthedrainplugandsealandtorquetheplugto
17.6N-m(13ft-lb).
8.Cleanaroundtheoildipstickandllspout,andremove
thedipstick(Figure32).
Figure32
1.Oildipstickandllspout
9.Pourthespeciedoilintotheintothellerspoutuntil
theoillevelisuptotheFullmarkonthedipstick
(Figure32).
Note:Addtheoilintotheengineslowlyandcheck
theoilleveloftenduringthisprocess.Donotoverll
theenginewithoil.
10.Insertthedipstickfullyintothellspout,removethe
dipstick,andchecktheoillevel(Figure32).
Note:Ifnecessary,addthespeciedoilintotheengine
untiltheoillevelisattheFullmarkonthedipstick.
11.Installthedipstickintothellspoutuntilthedipstick
isrmlyinplace(Figure32).
12.Connectthebattery,andlowerthecargobox;referto
ConnectingtheBattery(page36)andLoweringthe
CargoBox(page17).
ChangingtheOil(Models07273and
07273TC)
OilType:Detergentoil(APIserviceSLorhigher)
CrankcaseCapacity:1.4L(1.5qt)whenthelterischanged
Viscosity:Seethetablebelow
Figure33
1.Startthevehicleandlettheenginerunforafew
minutes.
2.Parkthemachineonalevelsurface,settheparking
brake,rotatetheOn/OffswitchtotheOffposition,
andremovethekey.
3.Raisethecargoboxandsecureitwiththeproprod;
refertoRaisingtheCargoBox(page17).
4.Disconnectthepositivebatterycable;referto
DisconnectingtheBattery(page35).
5.Alignadrainpanwitha1.8L(1.9qt)capacityunder
thedrainplug(Figure34).
Figure34
1.Engine-oil-drainplug
2.Engine-oillter
6.Removethedrainplugandseal(Figure34).
31