6-18
User's Manual
POWER AND
POWER-UP MODES
Disconnecting the High Capacity 2nd Battery Pack
Follow the steps below to disconnect a High Capacity 2nd Battery Pack.
CAUTION: When handling High Capacity 2nd Battery Packs, be careful
not to short circuit the terminals. Also do not drop, hit or otherwise apply
impact; do not scratch or break the casing and do not twist or bend the
High Capacity 2nd Battery Pack.
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Lay the computer upside down.
5. Push the release latches in the direction of the arrows.
Figure 6-5 Releasing the latches
To Next Page
Loading...
