9-11
TROUBLESHOOTING
Pointing device
If you are using a USB mouse, also refer to the USB section in this chapter and to
your mouse documentation.
TouchPad
Problem Procedure
On-screen pointer The system might be busy. If the pointer is
does not respond to shaped as an hourglass, wait for it to standby
Pad operation its normal shape and try again to move it.
Double-tapping Try changing the double-click speed setting in
does not work the mouse control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
The mouse pointer Try changing the speed setting in the mouse
moves too fast or control utility.
too slow
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
If problems persist, contact your dealer.
Hardware and system checklist
To Next Page
Loading...
Need help?
General