• Game mode is available in external input mode
(other than aerial input). When you select
Game mode, suitable widescreen formats will
be selected.
• PC mode is available in RGB/PC input mode or
HDMI input mode.
• The Picture Mode you select affects the
current input only. You can select a different
Picture Mode for each input.
Resetting the Picture Mode
This feature resets Picture Mode to the factory
settings�
Note:
If no picture settings have been changed, Reset
is not available.
1 From the PICTURE menu, press s or r to
select Reset, and then press �
2 A confirmation message will appear� Press v
or w to select Yes, and then press �
Activating the picture preferences
You can customise current Picture Mode
settings as desired� For example, while selecting
"Dynamic," if you change the following items,
such as Backlight, Contrast, Brightness,
Colour, Tint, Sharpness, and the Advanced
Picture Settings items, your new setting are
saved for "Dynamic" Picture Mode�
1 From the PICTURE menu, press s or
r to select either Backlight, Contrast,
Brightness, Colour, Tint or Sharpness�
2 Press v or w to adjust the settings�
Note:
Contrast are not available when Picture Mode
is set to AutoView.
Setting the Black/White Level
Black/White Level improves the definition of
dark areas of the picture�
1 From the PICTURE menu, press s or r until
Advanced Picture Settings is selected�
2 Press v or w to select Off, Smooth or
Standard�
Note:
When Picture Mode is set to AutoView, Auto
mode is available.
Using ClearScan 100 Pro
This feature reduces image lag and provides a
crisper image�
1 From the Advanced Picture Settings menu,
press s or r until ClearScan 100 Pro is
selected�
2 Press v or w to select On or Off�
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green
or blue tint�
1 From the Advanced Picture Settings menu,
press s or r to select Colour Temperature,
and then press �
To Next Page
Loading...
