112 ACE-tronics G9 ASD Installation and Operation Manual
Analog Input Filter
Program Frequency Analog Filter
Analog filtering is applied after the analog reference signal is converted to a
digital signal. The type of filtering used is Rolling Average over time.
Settings:
None (1 mS)
Small (8 mS)
Medium (16 mS)
Large (32 mS)
Huge (64 mS)
The analog input signal is sampled and converted to a digital signal. With no
fi
ltering applied, the resulting digital value is scaled for use by the
microprocessor of the ASD.
If the filtering selection Sm
all is selected, the ASD averages the last 8 mS of
sampled signal and converted (digital) values. The rolling average is updated
(every 4 µS) and scaled for use by the microprocessor.
This holds true for the Me
dium, Large, and Huge selections providing a larger
sample to produce the average for use by the microprocessor.
False responses to electrical noise are eliminated with no loss in bandwidth
bec
ause the value used by the ASD is the average value of several samples.
Direct Access Number — F209
Parameter Type — Selection List
Factory Default — None
Changeable During Run — Yes
F209 F209
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
