ACE-tronics G9 ASD Installation and Operation Manual 9
Operational and Maintenance
Precautions
• Turn off, lockout, and tag out the main power, the control power, and instrumentation connections
before proceeding to connect/disconnect the power wiring, inspecting or servicing the drive, or
opening the door of the enclosure.
• The capacitors of the ACE-tronics G9 ASD maintain a residual charge for a period of time after
turn
ing off the ASD. The required time for each ASD typeform is indicated with a cabinet label and a
Charge LED (shown for smaller ASDs in Figure 2 on pg. 16; LED is located on the front panel of
larger ASDs). Wait at least the minimum time indicated on the enclosure-mounted label and ensure
tha
t the Charge LED has gone out before opening the door of the ASD once the ASD power has been
turned off.
• Turn the power on only after attaching (or closing) the front cover and DO
NOT remove or open the
front cover of the ACE-tronics G9 ASD when the power is on.
• DO NOT attempt to disassemble, modify, or repair the ACE-tronics G9 ASD. Contact your ACE
World Companies Customer Support Center for repair information.
• DO NOT place any objects inside of the ACE-tronics G9 ASD.
• If the ASD should emit smoke, or an unusual odor or sound, turn the power off immediately.
• The heat sink and other components may become extremely hot to the touch. Allow the unit to cool
before coming in contact with these items.
• Remove power from the ASD during extended periods of non-use.
• The system should be inspected periodically for damaged or improperly functioning parts,
cleanliness, and to ensure that the connectors are tightened securely.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
