ACE-tronics G9 ASD Installation and Operation Manual 261
Enclosure Dimensions and Conduit Plate
Information
The part numbering convention is shown below. Use this information for ordering and to identify the ASD
typeform.
The enclosure dimensions for the available models (typeforms) are listed in Tables 17 and 18. The conduit
plates referenced are shown in Figures 36, 37, and 38.
G9 Part Numbering Convention.
Note: The Type 1 enclosed versions of these drives meet or exceed the specification
UL 50- 1995, the Standard for Heating and Cooling Equipment, and complies with the
applicable requirements for installation in a compartment handling conditioned air.
Note: All ACE-tronics ASD enclosures carry an IP20 rating.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
