ACE-tronics G9 ASD Installation and Operation Manual 65
UTILITIES
Version (Read-Only)
CPU Code Revision
N/A
MC Version
MC Revision
Main Board EEPROM Version
Main Monitor
Selections
Monitor 1
Monitor 2
PROTECTION
Protection
Abnormal Speed
Abnormal Speed Detection Time F622
Over-Speed Detection Frequency Upper Band F623
Over-Speed Detection Frequency Lower Band F624
Base Frequency
Voltage
Supply Voltage Correction F307
DC (Injection) Braking
DC (Injection) Braking Start Frequency F250
DC (Injection) Braking Current F251
DC (Injection) Braking Time F252
Forward/Reverse DC (Injection) Braking Priority F253
Motor Shaft Fixing Control F254
Dynamic Braking
Dynamic Braking Enable F304
Dynamic Braking Resistance F308
Continuous Dynamic Braking Capacity F309
Braking Resistance Overload Time (10x Rated Torque) F639
Emergency Off
Emergency Off F603
Emergency DC Braking Control Time F604
Low-Current
Low-Current Trip F610
Low-Current Detection Current F611
Low-Current Detection Time F612
Low-Current Detection Hysteresis Width F609
Overload
Motor Overload Protection Configuration F017
Overload Reduction Start Frequency F606
Motor 150% Overload Time Limit F607
ASD Overload F631
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
