Toshiba ACE-tronics G9 ASD - Page 83

ACE-tronics G9 ASD Installation and Operation Manual 73
TORQUE
Torque Speed
Limiting
Speed Limit (Torque = 0) Center Value F431
Speed Limit (Torque = 0) Band F432
Allow Specified Direction ONLY F435
FEEDBACK
Feedback
Drooping Control
Drooping Gain F320
Speed at 0% Drooping Gain F321
Speed at F320 Drooping Gain F322
Drooping Insensitive Torque F323
Drooping Output Filter F324
Feedback
PID Control Switching F359
PID Feedback Signal F360
PID Feedback Delay Filter F361
PID Feedback Proportional Gain F362
PID Feedback Integral Gain F363
PID Deviation Upper Limit F364
PID Deviation Lower Limit F365
PID Feedback Differential Gain F366
Process Upper Limit F367
Process Lower Limit F368
PID Control Wait Time F369
PID Output Upper Limit F370
PID Output Lower Limit F371
Process Increasing Rate F372
Process Decreasing Rate F373
Speed PI Switching Frequency F466
Override Control
Adding Input Selection F660
Multiplying Input Selection F661
PG
Number of PG Input Pulses F375
Number of PG Input Phases F376
PG Disconnection Detection F377
Simple Positioning Completion Range F381
Program Mode Menu Navigation
Primary Menu Sub Menu Parameter Name
Parameter
Number
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com