Toshiba B-EP2DL Series - Daily Maintenance; Cleaning Printer Components

2. MAJOR UNIT REPLACEMENT EO18-33024
2.6 Replacing the Battery Terminal
2-16
2.7 Replacing the Battery Terminal
1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC
Board.)
2) Remove the Stepping Motor. (Refer to Section 2.5 Replacing the Stepping Motor.)
3) Remove the Drive PC Board. (Refer to Section 2.6 Replacing the Drive PC Board.)
4) Hold down the Hook and remove the Battery Terminal upward.
5) Replace the Battery Terminal with a new one, then reassemble in the reverse order of removal.
Hook
Battery Terminal
Battery Terminal
NOTE:
Reassemble the battery terminal so that the tubes are
p
laced on the battery case.
Tube
Battery Case