Toshiba B-EP2DL Series - Replacing the Cover Open Switch and Media Sensor (Lower)

2. MAJOR UNIT REPLACEMENT EO18-33024
2.9 Replacing the Cover Open Switch and Media Sensor (Lower)
2-19
2.9 Replacing the Cover Open Switch and Media Sensor (Lower)
1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC
Board.)
2) Release the Hooks by pulling the Paper Guides, then remove the Paper Guide Ass’y.
3) Remove the Media Sensor Holder and Print Head. (Refer to Section 2.8 Replacing the Print Head.)
4) Remove the Media Sensor (Lower) from the Media Sensor Holder.
Hook
Paper Guide
Media Sensor (Lower)
Media Sensor Holder
Paper Guide Ass’y