2. MAJOR UNIT REPLACEMENT EO18-33024
(Revision Date: Dec. 16, 2008)
2.9 Replacing the Cover Open Switch and Media Sensor (Lower)
2-20
5) Remove the Cover Open Switch (L) and Cover Open Switch (R) from the Base Cover.
6) Replace the Media Sensor (Lower) and Cover Open Switches (L) and (R) with a new one, then reassemble
in the reverse order of removal.
Cover Open Switch (L)
Cover Open Switch (R)
Connector
Base Cover
NOTE:
Pay attention to the following when reassembling the sensor.
• Path the lead wires between the protrusions.
• Do not get the lead wires into the gears.
• Do not let the covers catch the lead wires.
To Next Page
Loading...
